Opening the lab

Finding the Focal Length of a Lens  / CSEC Physics
1/f = 1/u + 1/v
All labs
An optical bench with a lamp and cross-wire, a converging lens and a screen on a metre rule, the face-on view of the cross-wire and its image, and a graph of 1/u against 1/v built from the recorded readings.
Lens position, u
Screen position, v
Your readings
Line of best fit
Theory

Set up the bench

Human errors
Readings carry realistic slips, like a real student's
Lens position on the rule40.0 cm
Screen position on the rule85.0 cm
Graph
Show the rays
Draws the ray diagram, which gives the image away
Show the theory
Draws what the lens formula predicts for this lens
Try this: set the lens about 40 cm from the lamp and slide the screen until the cross-wire is as sharp as you can make it. With Human errors on, the image looks sharp over about 1 cm, so find both edges of the sharp region and take the middle. Then press Record and repeat at five more lens positions. v is the screen mark minus the lens mark.
How to answer: use 1/f = 1/u + 1/v with real distances, and remember the intercept of the 1/u against 1/v graph is 1/f, not f.
Object distance, u
40.0cm
Image distance, v
45.0cm
Sharpness
–%
Magnification, v ÷ u
–

Results table

Slide the screen until the image is sharp, then press Record u and v.
Record at least 3 readings first

Working

What a converging lens does

A converging (convex) lens bends light rays towards each other. Rays that arrive parallel to the axis all pass through one point on the other side, the principal focus, F.

  • Focal length, f: the distance from the lens to the principal focus, in cm here.
  • A fatter lens bends light more, so its focal length is shorter.
  • A lens has a focus on each side, the same distance f from it.

In this lab each lens has a hidden focal length chosen at random. Your job is to find it from readings, not to read it off.

Where the image forms

Object distanceImage
u greater than 2fReal, inverted, smaller. v is between f and 2f.
u = 2fReal, inverted, same size. v = 2f.
u between f and 2fReal, inverted, larger. v is greater than 2f.
u = fNo image: the rays leave the lens parallel.
u less than fVirtual, upright, larger, on the same side as the object. It cannot be caught on a screen.

A real image is one that light really reaches, so a screen can show it. That is why the experiment needs u greater than f.

The lens formula

1/f = 1/u + 1/v

Here u is the distance from the object to the lens, and v is the distance from the lens to the screen, both in the same unit. This is the real-is-positive form: for a real object and a real image on a screen, u and v are both positive.

Worked example: u = 30 cm and v = 15 cm. Then 1/f = 1/30 + 1/15 = 3/30 = 1/10, so f = 10 cm.

The magnification is m = v ÷ u, which is also image height ÷ object height.

The graph and why the intercept

Rearrange the formula: 1/u = −1/v + 1/f. That is a straight line, y = mx + c, with y = 1/u and x = 1/v.

  • The gradient is −1, so the line slopes downward at 45° if both axes use the same scale.
  • The line meets both axes at the same value, 1/f, in cm⁻¹.
  • Read the intercept k where the line meets the 1/u axis. Then f = 1 ÷ k.
Common CSEC error: writing the intercept as the focal length and forgetting to turn it upside down. If k = 0.050 cm⁻¹, then f = 1 ÷ 0.050 = 20 cm, not 0.050.

Does this line pass through the origin?

No, and it must not. The graph of 1/u against 1/v is not proportional: 1/u = −1/v + 1/f, so it has the form y = mx + c with a gradient of −1.

The intercept on either axis is 1/f, the one over the focal length. If the line did pass through (0, 0), 1/f would be zero and the focal length would be infinite. So draw the best line through the points, and read the intercept from it.

The method

  • Set up the lamp with its cross-wire at the 0 mark of the rule, then the lens, then the screen, all in line and upright.
  • Place the lens at a distance u. Keep u well above f so that the image forms on the bench.
  • Move the screen until the image is sharp. Read v from the lens to the screen.
  • Repeat for at least six lens positions, then work out 1/u and 1/v and plot the graph.

Finding the sharpest image: the image stays looking sharp over a short stretch of screen travel (the depth of focus). Move the screen until it first goes blurred on each side, then use the middle of the two positions.

Another method: a distant object

Light from a very distant object, such as a tree through a window, arrives almost parallel. The lens brings it to a sharp image at its principal focus. So the distance from the lens to a sharp image of a distant object is about f.

This is quick but rough, because no object is infinitely far away and the sharpest image is hard to judge. The u and v method with a graph is better, because it uses many readings. This lab does not simulate the distant-object method.

Precautions and sources of error

PrecautionWhy
Lens upright on its holderA tilted lens does not form the image where the formula says.
Lens and screen in line with the scaleThen the distances you read are the real ones.
Adjust the screen until the image is sharpOnly a sharp image sits where the rays meet, so only then is the reading v.
Nothing in the way of the lightAn obstacle changes the image.
Several lens positionsOne reading could be a fluke. A line of best fit averages out the slips.
  • It is hard to judge by eye where the image is sharpest.
  • The rule is not parallel to the line the stands slide along.
  • The lens holder is not at right angles to the rule.
  • The scale is read only to the nearest millimetre.

Where Paper 3 asks it

His notes list this experiment as set in January 2020, Paper 3, Question 1. Questions like it usually ask you to complete a table of 1/u and 1/v, plot a graph, read the intercept, and find f. The Paper 3 practice tab walks through each of those.

About this lab: it is a model. The lens formula is exact here, and the depth of focus of about 1 cm is a chosen value, not measured from a real lens.