Opening the lab
Asked for the energy to turn ice at −20 °C into water at 20 °C, most students write one line:
Q = mcΔT with ΔT = 40Ice does not become 20 °C water in one go. It warms to 0, then melts at 0, then the water warms to 20. Three stages, three separate sums.
Which one you need depends on whether the temperature is changing.
Q = mcΔTfor a temperature change with no change of state. Here c is the specific heat capacity of whatever phase it is in at the time.
Q = mLfor a change of state at constant temperature. There is no ΔT in this one, because there is no temperature change.
While ice melts, the energy going in is used to break the bonds holding the molecules in their fixed lattice, not to speed them up.
Temperature measures the average kinetic energy of the molecules. During melting the energy is going into potential energy instead, so the thermometer does not move.
Only once every last bit of ice has melted does further energy start speeding the molecules up again, and the temperature climbs.
| Stage | Energy for 100 g | Share |
|---|---|---|
| Warm ice −20 to 0 | 4 200 J | 9% |
| Melt at 0 | 33 600 J | 73% |
| Warm water 0 to 20 | 8 400 J | 18% |
Melting takes more energy than both warming stages put together, and produces no temperature rise whatsoever. That is why the flat section of the graph is the longest one.
| Quantity | Value |
|---|---|
| c, ice | 2 100 J/kg/°C |
| c, water | 4 200 J/kg/°C |
| c, steam | 2 000 J/kg/°C |
| L, fusion (melting) | 3.36 × 105 J/kg |
| L, vaporisation (boiling) | 2.26 × 106 J/kg |
The latent heat of vaporisation is about 6.7 times the latent heat of fusion. Turning 100 g of water at 100 °C into steam at 100 °C takes 226 000 J, against 33 600 J to melt the same mass of ice.
That is because boiling has to pull the molecules completely apart, while melting only has to loosen them enough to slide past one another.
It is also why steam at 100 °C scalds far worse than water at 100 °C: it gives up all that latent heat as it condenses on your skin.
The ice section is steeper than the water section because c for ice is half that of water.
Run it backwards and everything matches. Steam cools to 100, condenses at 100, the water cools to 0, freezes at 0, then the ice cools further.
100 g of steam at 100 °C landing on skin releases 226 000 J as it condenses, before it has even started to cool.
The same mass of water at 100 °C cooling to body temperature releases only about 26 000 J.
So steam delivers roughly nine times the energy, which is why a steam burn is far worse than a burn from boiling water at the same temperature. That is latent heat doing the damage.
Write each stage as its own line, with its own formula and its own numbers. Then add them.